A computer aided design method for car form and its application based on shape parameters

In the early design stage, automotive modeling should both meet the requirements of aesthetics and engineering. Therefore, a vehicle CAD (computer aided design) model that can be easily adjusted by feedbacks is necessary. Based on CE-Bézier surface, this paper presents a set of algorithms for parametric segmentation and fairing surface generation in a car model. This model is defined by a simplified automotive template and relevant control points, shape parameters and segmentation parameters, which can be modified to alter the car form efficiently. With this model and the corresponding adjustment method, more than fifty various vehicle models are established in this research according to different parameters. And two methods for calculating similarity index between car models are constructed, which are suitable for brand design trend analysis and modelling design decisionmaking.     

改性秸秆去除水体污染物的研究进展

水体污染物的高效去除是水生态持续健康发展中亟待解决的问题,而固载吸附是重要的治理途径。农作物秸秆因来源广及结构特殊等特点,受到研究者的广泛关注,用于开发新型高效吸附剂。综述了近年来改性秸秆在去除水体中重金属离子、有机污染物以及阴离子等方面的研究进展,并指出了改性秸秆吸附应用存在的不足及今后的研究方向,为开发新型秸秆吸附剂及农作物秸秆的高效利用提供参考。     

NH2-MCM-41的改性及其pH响应性释药的研究

采用正硅酸乙酯（TEOS）和3-氨丙基三乙氧基硅烷（APTES）通过共缩聚法合成介孔二氧化硅（MCM-41）。首先对其氨基修饰，再通过有机合成接枝—R基团（—R：—CHO、—OH、—CH₃、—COOH），制备得到Me-Ph-NH-MCM-41、OHC-Ph-NH-MCM-41、HO-Ph-NH-MCM-41、HOOC-Ph-NH-MCM-41四种不同的药物载体。利用FT-IR、Zeta电位、XRD和SEM对其结构和形貌表征，结果表明NH₂-MCM-41改性成功。以罗丹明B（RhB）为模型进行载药性能测试，并考察了此释药系统在模拟不同pH的体液下的敏感释药行为，同时探究了不同—R基团对释药的影响。结果显示，四种载体在中性条件下几乎不发生药物释放，通过改变环境体系pH可以有效控制药物释放，其释药行为可以用Korsmeyer-Peppas动力学模型来描述。实验表明，释药量：RhB@HOOC-Ph-NH-MCM-41>RhB@OHC-Ph-NH-MCM-41>RhB@HO-Ph-NH-MCM-41>RhB@Me-Ph-NH-MCM-41，不同—R基团的药物载体的pH响应性不同，其中RhB@HOOC-Ph-NH-MCM-41释药量在pH=1.2时可达57.87%，在用于药物智能控释材料方面具有一定的应用潜力。     

重力坝坝基多斜面抗滑稳定模糊体系可靠度研究

以基岩具有多斜面、多滑移通道的某实际重力坝工程为例,基于刚体极限平衡法,采用模糊理论和几种典型的体系可靠度计算方法,研究其典型坝段的坝基深层抗滑稳定模糊体系可靠度,探讨模糊理论中隶属函数形式、隶属度以及隶属函数中关键参数的取值对可靠度计算结果的影响。研究结果表明,采取限制失效概率模糊界限比的方法可使计算结果更具有参考性,考虑模糊性的抗滑稳定可靠指标的下限较常规可靠度计算值偏小,这在重力坝坝基抗滑稳定分析中应引起重视。     

航天用多弧段封头淬火装置优化设计

提出了某航天产品用多弧段封头产品的淬火处理方法;通过有限元分析,得出了多弧段封头在底部约束情况下的热处理畸变趋势;建立了多弧段封头淬火装置的三维模型,介绍了多弧段封头淬火装置的基本结构。通过有限元分析得出在淬火装置约束下,多弧段封头热处理,总畸变量为16.0 mm,Z向15.0 mm,X向8.5 mm。通过对多弧段封头淬火装置的热畸变情况分析,提出了淬火装置的优化设计方案,优化后的多弧段封头的热处理,总畸变量为7.0 mm,Z向10.0 mm,X向3.0 mm。解决了多弧段封头热处理畸变过大问题,并通过生产验证。     

整体顶梁滑移液压支架托梁受力分析

文章采用有限元分析,对整体顶梁滑移液压支架托梁的受力情况进行了模拟,提出了增加托梁两侧薄板厚度的同时减小薄板上销轴孔间距的优化改进方案,对支架的优化改进设计具有借鉴意义。     

酸性废水中As(Ⅲ)、Cu(Ⅱ)与铁粉的反应行为

在Fe-As(Ⅲ)-Cu(Ⅱ)-H₂O体系中, 研究了酸性废水中As(Ⅲ)、Cu(Ⅱ)与金属铁粉的反应行为, 考察了反应过程中As在气、液、固三相中的分配比。结果表明, As(Ⅲ)和Cu(Ⅱ)离子被Fe还原为单质As和Cu后, As、Cu进一步结合成Cu₅As₂等金属间化合物, 从而促进As(Ⅲ)沉淀反应的发生, 且无AsH3生成。在反应时间40min、铁粉过量系数1.2、溶液初始pH=0.0、温度40 ℃、Cu/As摩尔比1.0条件下, As在气、液、固三相中的分配比分别为0、20.7%和79.3%, 沉砷率为79.3%。     

Efficient removal of Congo red from pH-unregulated aqueous solutions by lignosulfonate-based polycatecholamine

Lignosulfonate-based polycatecholamine (PCEA-LS) was synthesized by a two-stage approach involving Mannich and catechol–amine reactions, and it was directly used to adsorb Congo red (CR) from the pH-unadjusted aqueous solution. PCEA-LS was characterized using scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT-IR), thermogravimetric analysis (TGA), and X-ray photoelectron spectroscopy (XPS). Various factors affecting on removal of CR by PCEA-LS were investigated in depth, including contact time, adsorbent dosage, and initial concentration of CR and adsorption temperature. The adsorption kinetics, isotherm, and thermodynamics of PCEA-LS for CR were explored in detail, and then its adsorption mechanism was systematically elucidated. Results indicated that the removal process of CR followed the pseudo-second-order kinetic model, and the isotherm data fitted the Langmuir model well. The maximum adsorption capacity reached 972.6 mg g⁻¹ at 30°C in the pH-unadjusted (pH = 6.25) solution possibly due to the hydrogen bond, π–π stacking, and electrostatic interaction between PCEA-LS and CR. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48640.     

In-line characterization of dispersion uniformity evolution during a twin-screw blending extrusion based on near-infrared spectroscopy

Properties of an immiscible polymer blend have been proved to be closely related to dispersion uniformity of the minor phase. At present, dispersion uniformity is difficult to evaluate during the blending process, resulting in hysteretic feedback. Aiming at this problem, this work utilized near-infrared (NIR) spectroscopy to in-line characterize dispersion uniformity evolution during a twin-screw extrusion. A multichannel NIR measurement system was set up and applied to evaluate the blending process of polypropylene and polyolefin elastomer (POE). Based on the NIR spectra collected at different positions of the extruder, five prediction models of POE content were established using the light gradient boosting machine algorithm. Dispersion uniformity was characterized through the fluctuation of the predicted content. The evolution of dispersion under such processing parameters was consistent with scanning electron microscopy.     

金属薄板平面铣削形变分析与控制

由于初始残余应力的作用,金属薄板平面加工普遍存在加工难度大,加工变形严重等问题,难以保证板面的加工质量。以不锈钢薄板的平面加工为基础,通过理论分析、仿真模拟和实验验证的方式,对金属薄板的加工形变进行较为系统的研究,分析了金属薄板加工形变的关键因素,总结了金属薄板残余应力分布形式以及有效避免加工形变的工艺方法,为类似金属板材加工提供理论参考依据。